.. include:: ../include/global.inc .. _install-all-in-one-dev-setup: All-In-One development setup ****************************** For users who want to get a development environment for itom, the main plugins and designer plugins there is an all-in-one development setup available. Using this setup, you only need to unzip one or two archives to your harddrive, install **git** and **Python** that are included in this archive and execute a setup script, written in Python. This script automatically downloads the current sources of |itom| and its plugins from the internet, configures the 3rd party dependencies (also provided in this package) and automatically configures and generates CMake for the single repositories. Using this setup tool, you can start developing |itom| or plugins within a short time. The Packages for the different VisualStudio Versions contain different Versions of the 3rd party packages. If you are forced to using a certain version of VisualStudio, use the correct package. Else the use of the most recent is recommended. The all-in-one development setup comes with the following features and 3rd party packages: **Version Visual Studio 2017** * Available for Visual Studio 32bit and 64bit * Python 3.7 (setup in package, needs to be installed) * Qt 5.12.0 (prebuild) * OpenCV 3.4.3 (prebuild) * CMake 3.13.2 (prebuild) * Numpy 1.14.6+mkl Optionally there is a 3rd party package that brings support for the PointCloudLibrary for itom. This secondary archive contains the following features: * Boost 1.68.0 (prebuild) * Eigen 3.3.7 (prebuild) * Flann 1.9.1 (prebuild) * QHull 2015.2 (prebuild) * VTK 8.1.2 (prebuild with Qt 5.3.2 support) * PCL 1.9.1 (prebuild with support of all libraries above) Prerequisites for the development setup ======================================== If you want to use the development setup the following prerequisites must be fulfilled: * Windows 7 or higher * Visual Studio matching Version to selected package Get and install the setup ======================================== The setup comes with one or two zip-archive files: * **itom_development_VS2017_Qt5.12.0_x86.rar**, **itom_development_VS2017_Qt5.12.0_x64.rar** or similar packages for other compilers (required) * **itom_development_VS2017_Qt5.12.0_x64_PCLAddon.rar**, **itom_development_VS2017_Qt5.12.0_x64_PCLAddon.rar** or similar packages for other compilers (optional, for compilation itom with PointCloudLibrary support, 3D visualization...) Download the 32bit or 64bit version depending on your needs from https://sourceforge.net/projects/itom/files/all-in-one-build-setup/. Then execute the following steps: 1. Download and unpack one or both archives into the same folder. You should then have the following folder structure: .. figure:: images/all-in-one-build/unzip-archives.png :scale: 100% :align: center * __install__ * 3rdParty * 3rdPartyPCL (if you unpack the ..._PCLAddOn.zip as well The __install__ folder is only necessary during the installation and can be deleted afterwards. After the installation, this folder will also contain a folder **sources** and **build** with the source repositories of itom and their builds. 2. Go to the **__install__** folder .. figure:: images/all-in-one-build/things-to-install.png :scale: 100% :align: center If not yet available, install * Git >= 2.x * Python >= 3.7.x * Numpy >= 1.8.x on your computer. This is required for the further installation. Optionally you can install the **Qt-AddIn** for Visual Studio as well as **TortoiseGit** from the **optional** folder. This can also be done later. .. note:: From Qt5 on, the Visual Studio debugger is sometimes not able to show the value of QString, QVector... in the tool tip text of a variable even if the Qt-AddIn is installed. If this is the case, please uncheck the option "Enable native Edit and Continue" in Visual Studio (menu -> tools -> options -> debugging -> Edit and Continue). For more information see http://stackoverflow.com/questions/26780517/qt5-visual-studio-2012-add-in-does-not-allow-debugging-into-qstack-qvector 3. Execute the script **setup.py** The next step is to execute the python script **setup.py** in the __install__ subfolder. Usually, this should work by double-clicking on the file. However you need to make sure that the file is executed with the Python version that you recently installed. If this is not the case, make a right click on the file and select **Open with...** and choose **python.exe** from the Python installation path (e.g. C:/python37). This script leads you through the remaining installation process using a menu guided approach: .. figure:: images/all-in-one-build/setup_py_screenshot.png :scale: 100% :align: center It depends on the version of the all-in-one development setup how many steps have to be executed by the **setup.py** script. In any case, you will get a list of all steps. Press any number after the question **your input?** followed by return to start the corresponding installation step. There is also a number that executes several other steps at once. You can close the script by the corresponding number and restart it at any later time and continue with the installation. Once you executed one step, an **(OK)** after the number shows you that the step already has been executed. An **(??)** means that no further information about a possible execution can be shown. .. note:: If you have already executed **setup.py** at least once, a file **setup_settings.txt** is created in the **__install__** folder. This contains some settings that you made during the installation. Delete this file if you want to restart the installation without preset settings. 1. Upgrade pip (only version >= VS2013): This step updates the **pip** package within the recently installed Python distribution to the current version. 2. Install Numpy 1.11.0 (only version >= VS2013): Numpy 1.11.0 is automatically installed. For the VS2010 version, install Numpy 1.8.2 manually. 3. Setup: clone git directories This command clones the **itom**, **plugins** and **designerPlugins** repositories from https://github.com/itom-project and creates the folders: * sources/itom * sources/plugins * sources/designerplugins If you have never executed this step before, the setup tries to guess the path to the application **git.exe** (that you installed before). You can accept the guessed path (type **y** and press return) or you can indicate the absolute path to this executable (e.g. **C:/Program Files (x86)/Git/bin/git.exe**). This setting is stored in the settings file **setup_settings.txt**. 4. Patch Qt in 3rdParty folder The folder **3rdParty** contains a prebuild version of Qt (5.12.0, with OpenGL support). No further compilation needs to be done. However this Qt installation needs to be patched in order to correspond to your paths. Use this setup step to execute the patch. If you are able to start executables like **assistant.exe** or **designer.exe** from the **qtbase/bin** folder of Qt, the patch seemed to work. .. note:: **How is this Qt prebuild version created?** The Qt version in the prebuild setup is obtained by the source archive of Qt 5.12.0 from qt.io. Using MSVC2017 32bit or 64bit, these sources have been configured using the same steps than indicated in :ref:`this link `. The configured project is then compiled (using jom 1.0.14 for a multi-threaded compilation) and only the relevant files are then copied into the Qt5.12.0 folder of your prebuild itom setup. .. note:: One drawback of this prebuild Qt installation is that you cannot directly debug into Qt methods (since the delivered ptb-files are not patched and point to invalid paths). If you want to have this feature (usually not required for standard programming), you need to compile Qt by yourself into the same folder using the approach given in :ref:`this link `. 5. Configure and Generate CMake (itom only) At first, |itom| needs to be configured using CMake such that the folder **build/itom** is generated with an appropriate Visual Studio solution. CMake is directly called from **3rdParty/CMake3.13.2** or similar. (If the configuration should fail, the CMake GUI is opened, you can reconfigure anything, generate the project by yourself and close the GUI. Then, the setup will continue.) Before you go on configuring the plugins and designerplugins, you need to build |itom| in Debug and Release first (in order to create the SDK). That is done in the following step. 6. Compile **itom** in Debug and Release This step compiles itom from **build/itom** in a debug and release compilation. Then the executables **qitom.exe** and **qitomd.exe** are generated. If you try to start them, this may fail, since the paths to the binaries of Qt, OpenCV and optionally the PointCloudLibrary are not included in the Windows path environment variable yet (see step 8) 7. Configure and generate CMake of plugins and designerplugins Similar to step 3, the plugins and designerplugins are now configured and generated (folders **build/plugins** and **build/designerplugins**). This step will fail, if the itom-SDK could not be found in build/itom/SDK. 8. Compile **plugins** and **designerplugins** in Debug and Release Same than step 4 but for plugins and designerPlugins. 9. Bundle In order to execute steps 1-6 manually, you can execute all these steps in one row using command 7 (sometimes you need to accept intermediate steps by pressing return) 10. Modify Windows path variable In order to find the binaries of Qt, OpenCV and optionally the PointCloudLibrary, it is necessary to prepend some paths to the Windows path variable. If you choose option 8, a string is print to the command line and saved in the file **enver.txt**. Copy the string and **prepend** it to the PATH environment variable of Windows. Afterwards it is required to restart the computer or log-off and log-on again. Now you are done with the setup. If you want, you can delete the entire **__install__** folder. Try to execute **qitomd.exe** or **qitom.exe**.